Hyundai Forums banner

Rear Bumper Backup Sensor Replacement?

6 reading
9.5K views 4 replies 4 participants last post by  Navyman50  
#1 ·
Hey y’all! I’m new to the forum and could use some advice on my 2012 Azera. To put things simply, sometime within the last two weeks one of the four backup sensors on my back bumper fell inside the bumper.

I got under the car and looked up and could see the hole where the sensor should be sitting but it’s not.

Has anyone ever had this happen before and were you able to do the repair yourself? If you weren’t able to do the repair, where did you take it and how much did it cost to fix?
 
#2 ·
00000732


Best practices for requesting help:


* If you haven't done so fill in your vehicle info and profile page. Shows up to the left
* Be sure you are in the correct forum for your vehicle.
* Do a seach for your problem. A lot of stuff has been asked and answered.
* Do not double post for the same problem.
* Give the model year....Engine size...transmission type (auto or standard)
* VIN number can be very helpful.
* Did you buy the vehicle new, if not, how many miles were on it when purchased? How many miles on it now?
* Describe the problem the best you can.
* Tell us what has been tried, if anything.
* If the vehicle has been to a repair facility it would be nice if you can scan or take picture of the bill and attach it to the post.
* If your vehicle is under warranty you should have the dealer check it out. If it's an issue they see many times they will generate a safety recall or do a TSB. This is how they know.


This information can save a lot of time and get you the answers you need much faster.


Thanks,
Welcome aboard.