I started off by swapping those sad Halogen Projectors for LED lights

Insanely easy and the instructions for doing this can be found here

LED Headlight Install Instructions/How to remove...

Parts used here found by the users of the following posts: 2021 CN7 Elantra Build thread (BLACK BADGES/SPOLER/OTHER... Led Bulbs Specific Parts Used: https://www.amazon.com/gp/product/B07RPC5L3W/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Hyundai Elantra Sedan (2021+ ) Reverse Light Covers...

www.hyundai-forums.com

 

Today I changed the Trunk lettering from Chrome to Black,matched the tinted signals and the wheels pretty well

Removal was pretty simple,just use masking tape to mark where the lettering goes

You can use fishing line to separate the letters from the adhesive,and then peel the remaining adhesive with your hand,wiping the surface down with isopropyl alcohol.

 

I love what I see going on with the aesthetic changes of yours and the red limited Elantra I've seen on here.

I have a cyber grey preferred (Canada), that I've also been doing similar things to.

So far I've -
Wrapped the roof Glossy Black
Carbon Fiber Side Mirrors (An aliexpress cover on)
Blacked out logos (An aliexpress cover on)
Blacked out "ELANTRA" emblem (Plastidip)
Various interior trim covers from Aliexpress (Door handles, door and Dashboard accents)
Vinyl wrapped bottom interior of doors
Smartliner Floor Mats

Next up looking to tint the rear windows and switch up some of the lights to LEDs.

Will post my pictures of my own maybe some time and very interested to see your updates .

 

I would love to see what you do with yours!

 

I love seeing what you’ve done with your Elantra!!! Good work!!!

 

Thank you! it's not as good as yours!

 

I asked Lamix-x (They made the turn signal films I use) for replacements since the originals didn't fit right and they sent replacements right away, here is the result

I think they turned out really good and I highly recommend them!

 

I have a Limited so am mostly LED already. Are you planning or have changed the license plate and center-brake lights? I'm looking into those as they appear to be very easy. Just wondering about proper reflector support for the center-brake to keep the light even.
If you do change the turn signals, will they require load resistors?

 

Most likely yes, they will require load resistors

 

Got replacement Black Badging in a few days ago and i absolutely love the look they give,ill get some better pics soon!

 

Alot has happened since i last updated!
I added LED brake lights and license plate lights as well as added an underglow kit

I havent installed the resistors to fix the warning light for my brakes,thats the next goal

 

Also i had to fix my crappy initial wiring for my underglow kit

it was very annoying to do but makes me feel way better about the setup and its longevity

 

I keep forgetting things!
I also installed a new exhaust!
I removed the Muffler and swapped the resonator for a BlackWidow Neighor-Hater resonator

 

I love this workaround, I hate that we don't have functioning exhausts, can you get better pictures of this setup, I might want to do this in the future!

Also, how much did it cost!

 

Also, I love the underglow, it gives it more of a presence on the road. It's not legal where I live, unfortunately.

 

 

Got new wheels today,they are 17x8 Drifz's and you can find them here: Drifz Speed 17x8 38 Bronze | 314BZ-7802438 | Fitment Industries

 

Installed a spoiler yesterday, I do not expect any performance gains from this as its mostly just an aesthetic mod
Here is the amazon link for those wondering DuckBill Spoiler
The quality seems good and the adhesive is holding very well, the spoiler is designed for the CN7 so it follows the bodylines

 

Installed a spoiler yesterday, I do not expect any performance gains from this as its mostly just an aesthetic mod
Here is the amazon link for those wondering DuckBill Spoiler
The quality seems good and the adhesive is holding very well, the spoiler is designed for the CN7 so it follows the bodylines View attachment 477648 View attachment 477649 View attachment 477650

Do you plan on lowering the car?

 

Have you gotten your rear window spoiler yet? If not, you should check out the Onzigoo spoiler on eBay...a little pricey for a trim piece but I LOVE mine and honestly it looks like it came that way.

Pardon Our Interruption...

 

I haven't but ill take a gander

 

Nice Elantra ! I wanted to know for the daytime running lights or side light , what color is it ? So I could could I T-Tap for an accessory light?

 

I love your dual exhaust. Been searching around for a kit but nothing showed up. Could you show the items you bought for the exhaust and give me the number of the shop that did the work? I'd love to put something simmilar and could be faster for the shop if they already have a list or the scheme of the end.

 

Hey boss I know you contacted me on Instagram, I am sorry there is no ready made exhaust kit here, it is a complete custom build.
The only thing that was outright purchased by me as an individual project was the Black Widow Neighbor-Hater muffler.
The shop that did the build is Americas Speed Shop ,they are based in Rhode Island. you can reach them through Instagram

 

Hey guys here is a video of my Elantra on a Dyno so you can hear what it sounds like.
(Also stock power numbers are in the description.)Vroom Vroom