My 2008 i10 style warning light stays on. Checked for fault codes and got
B1101 battery voltage high ACTIVE
B1620 SRSCM internal failure ACTIVE
The voltage measured 10.4 volts
My question is - do I need to replace SRSCM or could something else be at fault?
The ECU code was 95910-0x200,
Would a used SRSCM (with the same code) need to be taken only from a 2008 i10 style or would any Mk1 i10 fit without needing recoding.
B1101 battery voltage high ACTIVE
B1620 SRSCM internal failure ACTIVE
The voltage measured 10.4 volts
My question is - do I need to replace SRSCM or could something else be at fault?
The ECU code was 95910-0x200,
Would a used SRSCM (with the same code) need to be taken only from a 2008 i10 style or would any Mk1 i10 fit without needing recoding.
