2013 Sonata GLS, front Splash shield, undertray

Arthur E. Petersen Jr. · Jul 6, 2019

Ther rear of my driver's side splash shield began dragging last night. Don't know how it happened, but I found a rusted bolt/washer (no nut) on the ground. Can't tell where it came from. Got help pushing the shield back in place (seems firmly in place) and got home. A Hyundai parts diagram seems to show only two bolts/fasteners holding the shield in place.

Without jack stands or a lift I can't see the rear of the shield where the bolt apparently came from. A You Tube search has not revealed anything.

Anybody experienced this before and or have a photo or diagram?

Thanks.

Gerard 2 · Jul 6, 2019

No ideas if this is your shield

https://www.drive2.ru/l/8972374/

looks like 6 bolts , 3 either side into those supports

The rest are tapping screws

mrpetemd · Apr 12, 2020

Very late reply but I was able, with help to temporarily get the undertray off the ground. Took it to AAA the next day and they reinstalled it fro free. It's a very common issue due to parking lot bumpers.

DarrenBach · Apr 12, 2020

I exchanged all of mine for stainless hex-head cap screws with washers. I think I have one that snapped-off from rust.

2013 Sonata GLS, front Splash shield, undertray

Top Contributors this Month

Recommended Communities