Hyundai Forums banner

Your Reviews For This Amplifier

2.1K views 15 replies 5 participants last post by  asick  
#1 ·
Guys, I'm looking to buy this amplifier this week. Can anyone make a comment on how good this will be? I plan to use it bridged 4Ohm for a 10" enclosed sub. Also, can you suggest a good sub to go along with this? Thanks....

Power Acoustik BAMF1250/2 Car Audio 2CH 1250W Speaker Amplifier
220W x 2 @ 4 Ohms
280W x 2 @ 2 Ohms
560W x 1 [Bridge] @ 4 Ohms

Die-Cast Aluminum Chassis
• Jet Black Texture Coat Finish
• Gloss Black Plexiglas Top
• Front Edge Pre-Amp and Connections
• Top Mounted Protection Indicator
• Chassis Integrated Mounting Feet
• All MOSFET Transistor Amplifier
• Regulated PWM Power Supply
• Three-Way Protection Circuitry
(short, thermal & overload)
• Hi/Low/Subsonic Crossovers
• Pre-Amp Outputs (ex. 1200/4)
• 200mV-6V Low Level Inputs
• Direct Input 4 ga. Power & 8 ga.
Speaker Terminals
2/4 Ch. Features

• 2 Ohm Stereo, 4 Ohm Bridged Stable Class A/B
• Tri-Mode Capable
• Variable 12dB 30-250Hz LPF
• Variable 12dB 50-500Hz HPF
• Variable 0-12dB 45Hz Bass Boost
• Variable 12 dB 15-50Hz Subsonic Filter
(ex. 800/2 & 4ch. models)
• Frequency Response: 10Hz - 30kHz
• Signal-to-Noise Ratio: 97dB
• Total Harmonic Distortion: .02%
• Dash Mount Remote Gain Control (2 ch. models)

Mono Block Features

• 1 Ohm Stable Class D
• Variable 12dB 40-200Hz LPF
• Variable 12dB 20-50Hz Subsonic Filter
• Variable 0-18dB 45Hz Bass Boost
• Frequency Response: 15-150Hz
• Signal-to-Noise Ratio: 100dB
• Total Harmonic Distortion: .5%
• 180o Phase Switch
• Dash Mount Remote Gain Control
• Bridged Synchronization
(strap amps together for double power!)
 
#3 ·
I dont see anything wrong with it. Looks like it would be just fine...esp at 560 watts bridged at 4ohms.

As long as the sub would take it....should be fine. There's a miriad of subs you could choose from with that much power. JL...Kicker...Polk...anything. That's a lot of power for a 10".
 
#6 ·
QUOTE (asick @ Feb 22 2011, 04:44 PM) index.php?act=findpost&pid=405579
thanks guys. Just bought it. I'll actually go with 12" sub. ordered the custom sonata enclosure from ebay. Hopefully ill do the install in 2 weeks. Willl let you know how it does.

just remember to take pics!!!
 
#8 ·
QUOTE (Philth @ Feb 22 2011, 05:50 PM) index.php?act=findpost&pid=405612
If you get one of those amps for a sub, you may want to get a Class D mono block amp because they are much more efficient that the multi channel class A/B amps which draw a bit more current. Just an FYI thing for you.
I realize that, I kinda hit the button too soon nd now stuck with this amp (no returns). But I think this should be good for me. I am more of trying to install a decent amp and sub, nothing to raise hair on the back. guess the longest wait will be on the enclosure, everything else (Amp, installation kit, sub) shipped today itself.
 
#12 ·
QUOTE (Philth @ Feb 23 2011, 08:15 PM) index.php?act=findpost&pid=406168
dual 4 ohm vc? If so, you can only wire it for a 2 ohm load or 8 ohm load. Your amp is only stable to 4 ohms bridged.
Any suggestions what sub can be wired for best results and get most power out? I think I made a mistake but cancelled order for sub now. Suggestions will help..thanks
 
#16 ·
QUOTE (Philth @ Feb 25 2011, 11:24 AM) index.php?act=findpost&pid=406873
I forgot about a dual 2 ohm voice coil sub as well. They aren't all that common though.
How will this sub and enclosure hold with this amplifier... any comments/opinions?

Kicker CompVR 07CVR124 12-Inch 4-Ohm DVC Subwoofer
http://www.amazon.com/gp/product/B000N8MW8...=A2KTLUJEJBW8GS

12-inch CompVR Subwoofer with 4-ohm impedance
Injection-molded cone with 360-degree back bracing and aluminized coating; ribbed Santoprene surround
400 Watts RMS (800 Watts peak) power handling
25-500 Hz frequency response
One-year limited warranty
Technical Details
Size (IN.,CM): 12, 30.5
Impedance (OHMS): 4 DVC
Max Rec Amplifier Power (WATTS PEAK/RMS): 800/400
Sensitivity (dB 1w/1m): 86.7
Frequency Response (Hz): 25-500
Mounting Depth (IN.,CM): 6 5/16, 16.1
Mounting Cutout (IN.,CM): 11 1/8, 28.3
Min Rec Sealed Box Volume (CU. FT., Liters): 1, 28.3
Max Rec Sealed Box Volume (CU. FT., Liters): 4.6, 130
Min Rec Vented Box Volume (CU. Ft., Liters): 1.75, 49.6
Max Rec Vented Box Volume (CU. Ft., Liters): 2.25, 63.7

Also I am buying this enclosure for the sub from amazon

Atrend E12Sv B Box Series 12-Inch Single Vented Subwoofer Enclosure
12-inch Single Vented Enclosure
MDF Construction
Completely Carpeted Enclosure
1-inch Speaker Baffles
Screwed Down Terminal Cups