Thanks for the info.... :thumbsup:

 

Hi All

Please every once in a while some of you people who down load the

attachements , write something on this thread to keep it alive , for

the benifit of all the friends .

Regards

 

Thanks for your upload.

How often will you guys change the timing belt ? the manual said 60k km for inspection and 90k km for replacement. But in HK, people in the forum will said it is better to replace it in 50k ~60k mileage, as Korean-made car do have a shorter life-cycle on this part and a broken timing belt will sure damage the engine (no matter it is running or idle-to-startup). And one more thing, just curious Is it expensive to replace timing belt in Malayasia/Singapore ? It cost about US$200 to do this kind of maintenance in HK local gargage. Normally we don't do inspection only as the labour cost to extract it already contribute a considerable amount in the total bill.

Originally posted by mazen@Nov 7 2006, 08:26 PM
Hi All

    Please every once in a while some of you  people who  down load the

  attachements , write something  on this thread to keep it alive , for

  the benifit  of all the friends  .

  Regards

[snapback]62157[/snapback]​

 

Hi os_ecu,

Yes, the book says change it at 60,000km but many says it can last till 90,000km. For me, I changed at 70,000km just to be safe. It cost me S$380 to get it change inclusive of parts and labour and also the water pump. Upon close inspection on the belt after the mechanic took out, the belt looks good without much wear or tear...So I guess what people say about changing the timing belt at 90,000km can be quite true to a certain extent but do it at your own risk. :amen:

 

Originally posted by os_ecu@Nov 13 2006, 04:46 PM
Thanks for your upload.

How often will you guys change the timing belt ? the manual said 60k km for inspection and 90k km for replacement. But in HK, people in the forum will said it is better to replace it in 50k ~60k mileage, as Korean-made car do have a shorter life-cycle on this part and a broken timing belt will sure damage the engine (no matter it is running or idle-to-startup).  And one more thing, just curious Is it expensive to replace timing belt in Malayasia/Singapore ? It cost about US$200 to do this kind of maintenance in HK local gargage. Normally we don't do inspection only as the labour cost to extract it already contribute a considerable amount in the total bill.

[snapback]62872[/snapback]​

Since you live in HK, it'll be the same as in Singapore as most of the time you are doing City driving more than Highway driving. When you are driving around in the city, there are lots of start-stop traffic conditions, even you do not clock any mileage, the engine still turns and moving off does take it toll on the belt and bearings. So, you can't really follow the recommended mileage in the manual as those are not for high city driving conditions. Take about 20% or 30% lesser than the recommended mileage for the changing of the timing belts, tensioners and bearings.

 

Thanks for your advice. I do share the same feeling as the tear and wear of Timing Belt cannot be estimated directly from mileage. As the engine is running, no matter it is idle or not, the aging is still carry on.

I think I will replace it in 60k km together with the pulley, water bump and all other belts.

Btw, how is the Traget's gas comsumption in Singapore ? We (data get with some other Trajet owners) in HK about 7~9 km/l (or HK$1.8~HK$2.0/km, we have around 100% tax imposed in HK) depending on the driving route /habbit

Originally posted by Vtim@Nov 14 2006, 04:18 PM
Since you live in HK, it'll be the same as in Singapore as most of the time you are doing City driving more than Highway driving. When you are driving around in the city, there are lots of start-stop traffic conditions, even you do not clock any mileage, the engine still turns and moving off does take it toll on the belt and bearings. So, you can't really follow the recommended mileage in the manual as those are not for high city driving conditions. Take about 20% or 30% lesser than the recommended mileage for the changing of the timing belts, tensioners and bearings.

[snapback]63017[/snapback]​

 

Hi All


I am writing again in this thread to give the new friends

the chance to down load the attachements located at

the begining .



Regards

 

thanks for that

 

does anyone have the information on replacing the belts on the 2.7 V6 please

 

Hi mickey taker


Please , download the workshope manual at the top of the starting

page , it includes the 2.7 engine .



Regards

 

cannot download already?

 

I like to download the files about the timing belts.
Can anyone put these on-line? :liebe011:

 

QUOTE (marrcel @ Sep 1 2009, 12:35 PM) index.php?act=findpost&pid=260286

I like to download the files about the timing belts.
Can anyone put these on-line? :liebe011:

Actually, that would be a copyright violation.

Why don't you join the hmaservice.com website? It's free, it's the official Hyundai service website, and it's got all that information available. Only for US cars, unfortunately.

 

Hi all, i just joined to get some timing info. I cant get the links in this thread to show me the pictures. Could someone upload the pics of where the timing marks should be please(or a link to pics)? The instuructions look like they have been translated from another language and i cant understand them.

Cheers Shane

 

Hi magenoodle


Register At this link and get as much info . as you want .





http://www.hmaservice.com/


Regards

 

Thanks for your upload.