Awsome. Are those shocks meant for the accent or are they from a different car?

 

yeah ! we defenetly need some other details about that!
what car did you take the part from
what are the part number of the front and rear absorber ...

should be a great post!

 

Dear all,

sorry for the short post... now i'll try to improve the first post

1 - FR shock absorber: Koni STR.T 8250 1002. This absorber fits to BMW E36, Toyota Chaser (1984 - 1988), i think this list can be continued . I had installed these absorbers by myself. BUT! Stock dust boot MUST(!!!) be changed! because it isn't covered Koni STR.T. I had bought dust boot from Ukrainian car VAZ 2109/2108 ( http://chernovtsy.prom.ua/p1433055-pylnik-...09-099-015.html )
So, Koni STR.T 8250 1002 = 2*$63.00 = 126$
dust boot = 2*4$ = 8$
Total price for 2 FR shock-absorbers is 134$

2 - FF shock absorber: Koni Sport 8610 1410 (cartridge!). This absorber fits to Hyundai Coupe (1997-1999), Lantra (10.97-05) may be something else . I've installed them at service center. We unmounted stock absorbers, shear the top part of absorber, cast it with drain, cleared inside, put koni cartridge, bashed sealant and built up
So, Koni Sport 8610 1410 = 2 * $149.00 = 298$
work = 2*20$ = 40$
Total: 338$

Thanks for attention

 

Thats nice!! great info for future replacement.

 

thanks for your replies
BTW - screwing on bottom of the absorber to the rail only under load - it's very important!