Hyundai Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey there, I just got a wheel alignment and they printed out a before and after from the machine. All of the pictures and videos i've seen shows that the after should all be in the green but the Camber and caster on the front right are still red and the back left is still red/they took he back toe out of alignment it looks like. I had an issue with it pulling to the right before the alignment, now it drives relatively straight except when I take a slight left turn and I "reset" the wheel it resets to pulling to the right just slighty, but if i set the wheel center the car will drive straight, if i'm turning it resets to pulling to the right a little. Is that because the values on the print out are still in the red? Or does this look normal so much that the values arent to far out of there recommended specs. Thanks i1100.photobucket.com/albums/g411/heartagram6121/thumbnail.jpg
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top