Hyundai Forums banner

1 - 3 of 3 Posts

·
Banned
Joined
·
44 Posts
Discussion Starter #1
hey guys im needing help badly... I went to change my spark plugs today and realized the only socket that would fit the spark plug was a 13/16 socket... i didnt have a spark plug socket that big so i used a regular socket and it slid in like nothing but when i started tightening the plug the wrench became stiffer and stiffer to turn but when the plug was tightened the socket refused to come out so i had to take off the plug just so the socket could come up and slide out. Anybody had any problems like this?? I have no idea how to tight that spark plug back in...
 

·
Registered
Joined
·
4,851 Posts
Most socket sets come with a spark plug socket. It's a little thinner walled, and has a rubber bushing inside to hold the plug so it doesn't fall out inside. Maybe you should invest in one if you don't have it.
 
1 - 3 of 3 Posts
Top