Hyundai Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Wondering if anyone has had communication problems while talking to the immobiliser. Either when programming keys or the live data loosing communication after a few seconds of reading?

Also can anyone confirm any of the following measurements:
The feed voltage to the antenna coil -I'm getting a 3.45v feed which drops to 0 once the coil is plugged in and energized.
8 ohms going through the coil also. 12 volts in the comms line from the ECM to the smartra box.
I have a good earth and positive to the smartra and a good earth to the coil.

Any help is appreciated, thanks.
 
1 - 1 of 1 Posts
Top