Hyundai Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello everyone. I have 2019 Santa Fe with 75k miles. Start/stop feature worked fine until recently it stopped car and didn’t start it. I had to try start car by button few times. It took 2-3 cycles to start it. After pressing the button nothing happens, same as if you press button without pressing brake pedal. Has anyone experienced something like this?
 

·
Registered
Joined
·
4,094 Posts
I know it’s only a 2019 but I would check the battery. These things can play havoc on everything!
 

·
Registered
‘19 Santa Fe Ultimate 2.0T FWD (Machine Gray/Espresso Gray)
Joined
·
1,645 Posts

·
Registered
‘19 Santa Fe Ultimate 2.0T FWD (Machine Gray/Espresso Gray)
Joined
·
1,645 Posts
I have found on my 2019 Ultimate that using the Auto Hold feature, stops the Auto stop/start. It's sort of a pain for lots of in-town stop and go, but it never shuts down the engine at a long stop light.
That may be true on your vehicle at this moment, but it’s not supposed to do that.
 
1 - 9 of 9 Posts
Top