Hyundai Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi everyone, this is my first post on the forum. I am replacing the rear brake rotor and pad on my 09 Santa Fe 2WD 2.7L. I tried removing the rotors using hammer and 8*1.25 bolts for hours but couldn't get off. I can see the rotor is not stuck to the hud, however the brake shoes are stuck to the rotor. Unfortunately, there is no place to adjust the star thing on this rotor to loosen the brake shoes. I don't want to just hammer off the rotor because I feel the brake shoes will be off with the rotor. Any idea of how I can release the shoes and get the rotor off? Thanks!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top