Hyundai Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
I purchased a Quickjack BL5000-SLX car lift. It lifts the entire car up with all wheels off the ground
The only way I can use this on my 2014 Santa Fe Sport is to put 4x6x12 blocks between the lift and the pinch welds. So to be clear, the weight will be directly on the pinch welds but distributed over 12" at each corner. Is it OK to do this?
 
1 - 3 of 3 Posts
Top