Performance parts for a 2005 Hyundai accent
1 - 2 of 2 Posts
Hi, has anyone tried installing eibach pro kit springs in an rb accent sedan? Do they fit?
https://www.eibachshop.co.uk/eibach-prokit-performance-spring-kit-e10460230122_p31223377.htm#.XNVnVVMRUwA
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Hyundai Accent LC 2003
Accent & Elantra Diesel ModelsHi guys i have a 2003 accent with D3EA engine and im having some issues with the engine. It has loud ticking noise when accelerating especially on uphills. Tappets changed because had some faulty ones. Im thinking of the injectors or else the balancer shaft. Anyone had this problem before?- 0
- 122
-
Luca193 · updated
-
Starting Problem 02 Accent
Accent & Elantra Diesel ModelsThe battery is good at aboit 85% had new cable to battery terminals tightened and one replaced. Thinking connection was bad with corrosion .That did not solve problem. Over last 2 days there was intermittent problem of NO CRANK, and No turnover , did start after awhile . But now no solenoid...- 4
- 2K
-
Hyundai accent crdi d4fb engine crank but no start
Accent & Elantra Diesel ModelsI'm a Pilipino mechanic I have a problem the original crankshaft was broken the machine chains a new after the I assemble the engine all timing mark seted then I put the engine to unit and all electrical socket connected put battery everything completed every erference voltage is ok all sensor...- 8
- 514
-
New Evap purge solenoid - New codes too?
Accent & Elantra Diesel ModelsI recently replaced a purge solenoid in a friend's 2008 accent because of an issue starting after filling the fuel tank. Removing the solenoid showed a bad seal- I could blow through it in both directions with no power applied. The new solenoid definitely works as intended. However... I did not...- 3
- 387
-
Hyundai accent. How reliable are these things?
Accent & Elantra Diesel ModelsHello everyone,, I have a 2008 model, 5 speed manual transmission. Odometer is 116,000 KILOMETRES. I've driven this thing over 40k since I bought it 2 years ago. I've had to replace the brakes, ball joints, bearings and sway bar which all wore out surprisingly early (previous owner ****** up?)...- 1
- 469
Join now to ask and comment!