Hyundai Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,886 Posts
QUOTE (optionstrail @ May 10 2010, 09:04 PM) index.php?act=findpost&pid=321573
Does any one know the thickness, in mm, of a new set of oem brake pads?


I'm asking for educational purposes. Took the Santa Fe in for oil change and brake service (inspection, clean and lube). Tech said that everything was fine, there was no build-up and the vehicle had 6mm left all four pads.

The write up said the 6mm thickness was "GOOD", but I would like to know the % of the original thickness.


TIA
You're around 50% or slightly better... similar to mine at 45,000 km (5-6mm rear, 7mm front).
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top