Hyundai Forums banner
1 - 1 of 1 Posts

· Registered
2007 Honda CRV
4,589 Posts
Stuck guide pins will make the pads stick to the rotor
It will cause one side of the pad to burn away quicker
Also, it will deform the rotor over time.

What should be done is to take the caliper off with the pads
On the caliper bracket which should still be on the car hold the guide pins
Try to release them from the bracket
Lube them and put them back
If they aren't stuck too much then whole thing should take about 30 minutes
For novice add another 30 minutes.
Check youtube videos to get better idea of what needs to be done
It will make the job easier and quicker
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.