Hyundai Forums banner
1 - 2 of 14 Posts

· Registered
Joined
·
17,570 Posts

· Registered
Joined
·
17,570 Posts
2 screws from inside trunk, 1 is readily visible, the other has a black patch over the hole, rip it out,,, 1 screw is silver, other is yellow (gold) color.

Inside the car, lift housing enough to twist socket to release it from lamp housing.. remove lamp housing

Replace bulb, and cut tail off socket as seen at link..

Install bulb with socket to lamp housing, slide whole assembly into place.

Install the screws.
 
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top