Hyundai Forums banner
1 - 4 of 4 Posts

1 Posts
Discussion Starter · #1 ·
I was driving my 2003 Hyundai Santa Fe last thursday (11/21) on some back roads, as I was coming up to a curve in the road the car stalled out and will not start, it hasn't started since. We changed the fuel pump because the car was running rough before the stall happened.

We hooked the car up to a Computer to read any errors, and got two errors- P0442 evap emissions control system and P0335 crank shaft position sensor. I looked at where the crank shaft position sensor is and the wires and connectors look okay.

I need help as this is our only car...any advice will help.

Also the Santa Fe is the 4 cylinder with 245000 miles on it.
1 - 4 of 4 Posts