Hyundai Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,133 Posts
It should only fit one way properly. One side is flat with a little piece that sticks down. It actually fits into a groove in the car's bulb housing. You could install it upside down but the clip holding the bulb in would not properly secure the bulb.


Shouldn't need to adjust anything. If it's still off when installed right then the problem is probably with the bulb.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top