Hyundai Forums banner
1 - 2 of 2 Posts

2 Posts
Discussion Starter · #1 ·
Hi all,
Recently carried out an oil & filter change on my i20.
All went well but a few days later noticed some oil on the drive way.
Automatically assumed loose sump plug or oil filter, both of these ok.
Closer inspection shows oil above oil filter on what I assume is oil pressure switch and also around dipstick area where it enters the engine. In also noticed oil along a joint above where these are positioned, some form of silicone sealant in the joint.
Any chance one of you more knowledgeable members could offer some advice on this ?
Car is 2010, 1.2l, 5 speed petrol
1 - 2 of 2 Posts