Hyundai Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
hello guys
is possible to programming central lock to close and open all doors with one press buttons?
( as you know , when push one time in remote unlock button, unlocked only driver door, when push 2 times, open all doors ), i need to open all doors with one push button, is possible? if yes, how?

best regards
 

· Registered
Joined
·
4,331 Posts
You need to muddle through it...it's not real user friendly. I changed mine to open all with one press. If I did it again I would have to re-learn the process...or maybe it's my feeble brain. :wacko:
 

· Registered
Joined
·
260 Posts
i saw in the manual, does not explain how to change or programming for all doors lock/unlock
From the manual:

Vehicle Settings -> Two-press unlock

Driver Door 1st Press - The driver's door will unlock when pressing the unlock button on the transmitter or smartkey, pressing the button of the driver's outside door handle with the smart key, or inserting the key into the key hole of the driver's outside door and turning the key toward the rear of the vehicle. All doors will unlock when pressing the unlock button on the transmitter or smart key, pressing the button of the driver's outside door handle with the smart key, or inserting the key into the key hole of the driver's outside door and turning the key toward the rear of the vehicle within 4 seconds.

All Doors 1st Press - All doors will unlock when pressing the unlock button on the transmitter or smart key, pressing the button of the driver's outside door handle with the smart key, or inserting the key into the key hole of the driver's outside door and turning the key toward the rear of the vehicle.

I'd imagine you'd want to find the option and set it to All Doors 1st Press
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top