Hyundai Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I am at witts end here I had a hole in my oil pan and decided to replace the old one with a new one... I removed it and put the new one on and everything was running fine... drove it around for awhile and then let it sit for a bit.... still fine then I drove for about 40 minutes and now it won't start up! I got it to run two times since then but after it runs it dies as soon as I shut it off... I checked all the fuses and they're working,,, I don't here the starter clicking over instead when I have the key on the on position I hear a humming noise... what could this be?
 

·
Registered
Joined
·
3 Posts
hmm did u touch any earthing straps or anything when removing the oil pan?

check starter motor bolts are in tight, check earthing straps are good, check battery terminals are on tight.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top