Hyundai Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
i have a Hyundai scoupe 1994 which I recently put the turbo lump in from a 1993 including the wiring harness I installed a manual boost control valve because the boost actuator was knackered, its running at about 0.8 bar but when im boosting it is sorta hiccupping if that makes sence sort of holds back goes holds back goes then goes when at max revs, but don't know why its doing this ???
 
1 - 2 of 2 Posts
Top