Hyundai Forums banner
1 - 1 of 1 Posts

·
Registered
Drives : Nissan NV200 Flies : Rans S6ES
Joined
·
17,375 Posts
The headlamps on the Accent are return side switched. What that means is the bulbs are supplied with 12V via the ignition and the switch sends a ground to the bulbs when the headlamps are switched on.

So to identify the low and high beam wires at the headlamp connector you need to connect your test lamp clip to battery positive then probe the headlamp connector terminals looking for a low beam and high beam switched ground.
 
1 - 1 of 1 Posts
Top