Hyundai Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have a 2013 Accent and have installing driving lights. I am looking for the correct high beam wire on the driver’s side on the headlight assembly. I will then run this to a relay so that when I turn on my highs, the driving lights will come on. I have tried to locate the correct wire but the one wire that is hot when the highs are on, is still hot when the car is off as well as the lights. Any assistance would be appreciated.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
That would explain why it was always hot. I have fog lights. I live in the country and use the driving lights with the highs. Which should I use for the lows on, driving lights off and highs on, driving lights on? Thanks for your help.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top