Hyundai Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi,Can anybody help?
I have a 54 plate 3 cylinder diesel getz (D3EA) engine, over the last 2 months or so the engine has become very lumpy below 2000 rpm, above these revs it runs absolutely fine. I have removed & cleaned the throttle body & replaced the MAF sensor, but fault is still the same. I don't think it is an injector fault, as if I crack them off one at a time there is no significant difference between them. I've also replaced the fuel filter just in case. I have no warning lights on & no faults show up on an OBD reader.
Can't find any info anywhere for the D3EA engine, any help out there pleeeaaassssseee!!
 
1 - 1 of 1 Posts
Top