Hyundai Forums banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
15,117 Posts
welcome to the forums :00000732:

your question is rather vauge.........is the brake stcking on just one wheel? if so l take it that you have replaced the caliper on that one sticking wheel.....are the two pins that the caliper fits on free so that the caliper can slide?.........if this all checks out o/k undo the bleed nipple, does this free the wheel? if so you may have internal damage on the flexible pipe

if all of this makes no difference you will need to get back to us with some more detail
 

·
Premium Member
Joined
·
15,117 Posts
if that's the case you may have a blockage in the pipe. make sure that the metal brake pipe that leads to that wheel is not crushed or has a kink in it, if that's o/k then change the flexible pipe
 

·
Premium Member
Joined
·
15,117 Posts
yes, but what about the fleible pipe? these can rot on the inside and cause a blockage. you said that if you release the bleed nipple it frees the brake.....its nothing to do with the abs sensor
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top