Hyundai Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
431 Posts
I hooked up bar to support engine weight on the left side of engine. Removed the overflow for radiator with two bolts, left passenger side engine mount after engine was properly supported and rubber bushing, this gave me access to all the bolts one needs to remove to get the bracket out of way to access the camshaft cover bolts. In all I would guess I had to remove about 10 to 12 bolts ranging in size from 8mm up to 14mm to access and remove the cover. .
Took a look at my Sonata after reading this and am curious where you were able to connect the chains on the support bar on the passenger side. Didn't look like anyplace was obvious unless its under the plastic engine cover.
 
1 - 1 of 1 Posts
Top