[Majstor]

Hello!

now that my hyundai is working i still have a problem that i was affraid its was going to remain from the previous owner, and that is the sound from the piston bearings/crankshaft bearings
now the engine idles normaly very very nice, no sounds nothing, but when you pressit to araund 1800 rpm, it starts making a strange noise, the oil pressure light does not come on ever.
ive put in new oil and filter and let it idle for abaut an hour, the noise calmed down in higher rpms, but is still there.


what do you suggest, should i replace only the bearings or the shaft also.

CHEARS

 

[Majstor]

today i have removed the lower oil pan cover, now the upper one is posing a problem, is it necessary to remove any thing more than the starter and exhaust hose ( and all the pan bolts). because the oil pan wont budge, any ideas?

chears

 

[Majstor]

The bearings have been replaced, ive put in 5w40 full syntetic oil and it seem like its running ok, there is a 0,1 mm diferenje between the first and second bearing journal, i hope it will last :banana:

with regards