Hyundai Forums banner

Engine cranks over but doesn't start

2K views 7 replies 4 participants last post by  Scotyp2004 
Old 2.7L,,,,,,,,,,, I would verify the crank position sensor pigtail is not all crack-fray with inside wires exposed / corroded

If it get a good rnough contact to short, it'll take out 1 of the ECU fuses and aid in keeping engine from lighting fire

 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top