Joined
·
17,570 Posts
QUOTE (Suzanna @ Oct 16 2010, 06:03 PM) index.php?act=findpost&pid=363930
Remove bulb, look and see if it 1 filament or 2 filament bulb... if 1, it be 1156, if 2, it be a 2357 ---> be aware of the staggered pins on outside of the base, this is to align bulb correctly in socket so tail light illuminate low watt filament, and brake light illuminate the brighter high watt filament... look at inside of socket and note the deep slot and short slot to match the pins on base of bulb..
Go here for similar topic, it has my pics loaded for reference --> http://www.hyundai-forums.com/t54024-2000-...tail-lights.htm
Move the trim panel, and pop the socket out of the lamp housing.I think I need a battery which is being discussed in another thread.
This one is complaining that the dealer said nothing about a tail light out. And let me leave with it out.
Or so it seems. Will check when I get home.
Is that bulb hard to change?
I did the left brake light last week.
Was afraid to do the third brake light.
Can I do the tail light?
Remove bulb, look and see if it 1 filament or 2 filament bulb... if 1, it be 1156, if 2, it be a 2357 ---> be aware of the staggered pins on outside of the base, this is to align bulb correctly in socket so tail light illuminate low watt filament, and brake light illuminate the brighter high watt filament... look at inside of socket and note the deep slot and short slot to match the pins on base of bulb..
Go here for similar topic, it has my pics loaded for reference --> http://www.hyundai-forums.com/t54024-2000-...tail-lights.htm