Hyundai Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hello, so I recently finished working on my 2005 Tucson swapped out the clutch and everything was working normal except for code P0118. I was getting a rough idle but was working as it should. Well as I was on the way to get the replacement sensor my car stalled out. Got towed home, replaced the engine temp sensor and now im not getting anywhere.

The code has disappeared but the car will not stay running at all. When I turn it over it runs for 5 seconds before stalling right out. The throttle doesn’t react at all when I tap the gas to try to keep it from stalling out.

No new or current codes, just starts, the starts will no reaction from the gas pedal. Anyone have this issues and can point me in the right direction.
 
1 - 1 of 1 Posts
Top