Hyundai Forums banner
1 - 1 of 3 Posts

· Registered
17,570 Posts
Go out to car, hop in front seat.. DO NOT START CAR --- press pedal a couple times till it is hard.

With moderate pressure on the pedal, start engine... the pedal should sink a bit as vacuum hits the boost cylinder..

Likely your change in pedal feel has to do with the friction co-efficient of different material pads and rotors..
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.