Hyundai Forums banner
1 - 3 of 3 Posts

·
Registered
2018 Sonata Limited 2.0T
Joined
·
625 Posts
Thanks. hopefully it will be a while for me, but good know the tricks.
You should not have to go through all that effort on your Limited 2.4.
Only the turbo cars have the half shaft. The half shaft and engine-mounted carrier bearing makes the left and right axles basically the same length. Designed to limit 'torque steer' caused by uneven-length axles in hi-performance applications.
 

·
Registered
2018 Sonata Limited 2.0T
Joined
·
625 Posts
When I installed the new intermediate shaft last weekend, I made sure to put grease on the splines. But damn, it was hard getting that off again.... after like 15 smacks of the slide hammer ...
Did you actually install a new intermediate shaft with a new bearing and mount, or were you saying you just replacing the right-side short shaft?
 

·
Registered
2018 Sonata Limited 2.0T
Joined
·
625 Posts
Did you lose any trans fluid when you changed out the left shaft or right intermediate shaft?
Is the feel more vibration or harmonic?
 
1 - 3 of 3 Posts
Top