Hyundai Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi guys I just picked up an auto 2009 i30 2.0. When i inspected the car it seemed fine buy I did drive it with the Windows up, when I started driving it around home I noticed a rattle when accelerating, I got my stethoscope out and I could hear a rattle and found it to be the evap purge valve and I replaced it and (I thought) the noise went away. I took it for a drive and could immediately hear the ticking noise again so I was mistaken for thinking it was the purge valve I could hear whilst driving and something else is rattling, I can't make it do it in neutral bit as soon as I drive it I can hear it. I'm going to replace the oil tomorrow morning but it has clean oil and a full service history with a recent oil change but it could be to thin but I'm not very confident it is that. Any help would be much appreciated cheers
 
1 - 1 of 1 Posts
Top