Hyundai Forums banner
1 - 2 of 2 Posts

·
Registered
Drives : Nissan NV200 Flies : Rans S6ES
Joined
·
18,652 Posts
The MK2 Santa Fe doesn't have a 3 terminal flasher relay. So you can't replace the original relay with an EP34. The flasher relay is an integral part of the ICM, which will have relays inside. Kinda like this ICM from another model...

460089


If I helped you fix it, why not...

Your support is greatly appreciated
 

·
Registered
Drives : Nissan NV200 Flies : Rans S6ES
Joined
·
18,652 Posts
glgbtf79 said:
mine is just a flat circuit board with no sockets relays, or anything on it.
I'm surprised to hear that. I didn't think they would be using solid state (electronic) relays on a 2007 MY car.
Regardless, what I said earlier still stands...The MK2 Santa Fe doesn't have a 3 terminal flasher relay. So you can't replace the original relay with an EP34.

Well, I suppose technically you can. But you would need to modify the wiring to bypass the circuitry inside the ICM. Fitting load resistors at the lamps might be an easier option.

If I helped you fix it, why not...

Your support is greatly appreciated
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top