Hyundai Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
246 Posts
Models prior to 2003 do not have the hood insulation. I do not know off hand the part number for the hood insulation, and if I did its for US models, but being that you are in Greece, I am sure any Hyundai dealership would be able to find out if there is one in their systems. Good luck and keep us informed.

TS out
 

· Registered
Joined
·
246 Posts
Well here in the states the OEm hood insulation only comes with the 3.5L engine.

The insulation is a moulded piece (some sort of moulded fiber and sound deafening material) with a metallic finish on one side (the side facing the engine). Its flexible about 1/4 inch thick (7 mm) It attaches to the hood with 14 pins. All Santa Fe hoods have the 14 holes that the insulation will fit into. It isn't cheap, its about $175.00 USD here in the states, so I do not know how much it would be for Greece. You will need to get the 14 push pins as well and those are about $10.00 US.
The part number for the OEM hood insulation is 81125-26002 see pic below.


Its a one piece item..


As you can see it has the opening for labels that are on the hood to be seen.


These are the push pins needed to attach the insulation to the hood. (81126-37010 and 81126-37014)


Final view attached to the hood.


Another hood insualtion attached view.


TS out
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top