Hyundai Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. SM (2001-2006) Santa Fe
    Hello, I’m asking for help and suggestions on how to remove bank 1 exhaust manifold on a Santa Fe 2.7 2003. Bank 1 is the one near the firewall hence the cry for help. If at all possible I’d rather not have to take off the inlet manifold. So far I’ve taken off the right side axle and generator...
  2. i40 Forum
    Hi - tried searching the forum but couldn't find an answer. Does anyone know how to remove the rear bumper on a 2012 i40 estate? One of the sensors is pushed in and I can't get enough force on it from sticking my hand round the back. Thanks in advance.
  3. i20 Forum
    Hello everyone! I have a 2009 i20 comfort edition and I need to remove the front seats to clean the floor underneath (a coffee spillage involving a co-worker, don’t ask:rolleyes:). Does anyone have any advice on how to do this? I feel like removing the seats themselves would be easy but...
  4. UK
    Hi there, Does anyone know if there's a workshop manual available for the i10 MK3 yet. What I'm after are instructions on how to remove the front bumper. Can't seem to find anything for this version. PDF or video would be fine. Haynes don't have one out yet. I found a video for the MK2...
  5. NX4 (2022+) Tucson
    Hey all! Need some tips on how to remove the roof rails on the NX4 in order to vinyl wrap the roof. It's a project I have to tackle myself and could use some tips. I see nothing to pull to access bolts or whatsoever. Would not want to pull it wrong neither since I'm located in the Caribbean...
  6. LC (2000-2005) Accent
    Hello! Thank you in Advance for any response. I’m going to remove my 2003s accent 1.6L engine and replace it with a 2005 1.6 accent. Is there any difference? The company selling the motor claims the engine will fit but I am looking for someone who has already done this to let me know! Also!! Can...
  7. SM (2001-2006) Santa Fe
    Hello, what direction is the bolt on the crankshaft pulley threaded? Do I have to turn it clockwise to tighten and counter-clockwise to loosen? Is it possible to deduce the threaded-ness of this bolt? Thank you.
  8. H-1, H-100, Starex & iMAX Forums
    Hi all, Gutting my IMAX to use as camper/weekender. I've hunted and got the details to remove the middle seats DONE! but I cant find any info on the rails and sliders. Any help appreciated (someone must of done it already :)
  9. JM (2004-2009) Tucson
    Hi all. My '07 Tucson's ABS kicks in at low speeds - I suspected an ABS sensor but after some research it seems one or more might just be corroded and misaligned. Either way, I need to remove the sensors. I watched a tutorial working on a big Dodge truck (I couldn't find a Tucson specific one)...
  10. CM (2007-2012) Santa Fe
    I'm doing my clutch and couldn't find instructions on how to remove transfer case so I've written them up here in case they come in handy for someone else. I'll post the entire clutch job on here when I'm done. Santa Fe CM 2.2 CRDI 4×4 AWD 5 speed Manual: transfer case removal using floor...
1-10 of 10 Results