They replaced oil pressure switch, oil pan + gasket. No charge. Mines gasket was slightly dampened but they replaced the whole thing anyway, said it is better than it leaks at a later day, then I have to pay.
I have same problem 3 times. 1st time they could not find any error code. 2nd time when I booked appointmt & arrived Dlr, the light went out. 3rd time was early Apr. 12. Came on 3 times in morning on every start, & after lunch going to DLr. It's out. All 3 times they said no code in the...
Fabulous light effect.
1)Are the 2 golden studs go into the "shield" shape black hole, & the 1 above it.
2) the 2 horizontal black holes at the very rear are not used?? If they are used, it will be hindering the backward removal effort. Right?
3) on the light asm, where do the black/yellow...
Tks so much for that picture, solved the mystery. The hole near the rear door is the reason I cannot pull it out. It will need an outward thrust at that end, then pull backward to take the asm out. Am I correct?
Really great help. Will try this when time comes.
Insert a larger blade flat screwdriver in, gently ply & pull out. Not that difficult. I have removed/inserted at least 3 times, keep upgrading my leds. Some months back I have described it in one of the threads.
That was just for the testing after installation. Of course never start the engine with hid on. What I meant was, when engine starts, the bulbs won't light up. Suggest you get slim ballasts, because right side has very limited space.