Hyundai Forums : Hyundai Forum - Conversation Between AUTOSPARK and Pceagle
Conversation Between AUTOSPARK and Pceagle
Showing Visitor Messages 1 to 2 of 2
    10-01-2017 06:35 PM - permalink
    Sorry, I'm not to clued up on the parts of cars that don't have wires attached. You'd be best to start a new thread and see if one of the more mechanically minded members can help.

    I don't know if your aware, but your supposed to bleed them in a specific order :
    1)Rear Right, 2)Front Left, 3)Rear Left, 4)Front Right

    If you didn't bleed them in that order maybe give it a go and see if that helps.

  2. Pceagle
    10-01-2017 06:21 PM - permalink
    Hey thank you for all the help diagnosing the electrical problem I had with Hyundai Tucson. Was wondering if you could help me with a brake issue I'm having as well. I had a rear break line blow a hole, so I replaced both break lines from the front drivers side inner fender all the way to the caliber. After doing so I have had a break peddle that is soft and only drivers side front and passenger side rear are working. When bleeding the breaks I get good flow on the breaks that are working but the other brakes don't seem to have the flow or pressure. I have replace the master cylinder thinking that was the problem, but did not change anything. Anything that you could suggest would be helpful.
For the best viewing experience please update your browser to Google Chrome