Join Date: Nov 2018
Location: Prague, Czech Republic
Drives Hyundai Accent LC
Mentioned: 0 Post(s)
Quoted: 2 Post(s)
Ok, so the car failed to start once again. This time 36 km away from home.
I got he meter out, checked the relay and other stuff you showed me. Everything was fine. So I went to the pump connector and on the first pin, where it is supposed to have 12V , instead it jumped around from 3 to 8 to 5 etc until finaly stedying on 12V.
So I figure it is mostlikely because of bad contact in the connector itself. But here comes the second question. Can I buy the connector separete and wire it up myself?