Join Date: Nov 2007
Location: Waikele, Hawaii
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Mine had two posts that are secured inside the trunk lid.
It's easy to get at so not a problem and the first time I removed the emblem, I did it without releasing the clips inside the trunk lid. But beware, there will be two holes left behind when you remove the flying "H".
Also, I replaced the flying H with an aftermarket emblem that was flat. Since the trunk lid is curved, it didn't stick very well and fell off after a couple of weeks. If you are going to mount something there, be sure to make sure it bends to conform to the trunk lid or secure it from the inside using the two holes.