Removing the center dash panel is not difficult (no tools needed)
1) Set ashtray out.
2) Grab ashtray and give a fast but short yank out. this will pry out the lower part of the panel.
3) Work the center and upper parts of the panel by pulling out with fingers.
4) Carfully unplug any wire harnesses that are attached to whatever swithches are mounted in the center panel.
Once center panel is removed, then removing and replacing the stereo system is very easy. I suggest that you DO NOT cut the wire harness plug that goes into the original stereo. Instead, splice the new connector into the existing wires. That will let you reinstall the original stereo any time without further complications.
Heres the schematics and dashboard removal instructions. There is the schematics for the wire harness, so you can figure out which cable belongs to each other with the new system.
TERRACAN_STEREO.pdf ( 112.86K )
Number of downloads: 24Robert B