I messed my Instrument Cluster up doing the LED mod. Several things happend and I don't know why. First the turn signal lights no longer work and yes I did solder them correctly. 2nd: When putting the little glass screen back in you need to make sure it is the right way. I was in a hurry do to family stuff around here and my screen cracked.

It's a plate of glass and shows how many miles are on the car ect.


I can't get the 1 part from the dealership I have to order a new Instrument Cluster.


Cost from the parts guy: $500 - $700 :crying: :crying: :crying:



FIRE MISSION: (I did trust me no one around here has em)

Please call your local junk yard and ask if they have a 2007 Accent GLS and that you need an Instrument Cluster for one. Also ask if they have a 2007 Kia Rio (basicly the same car)

I really really really really really need a new but cheaper than $500 Instrument Cluster :(

http://cgi.ebay.com/ebaymotors/2007-Hyunda...emZ360089526675


i hope this helps

it might i'll try it... on mine the gas gauge is on the lower right hand side.

Ebay has them all the time. I bought one from ebay last month so that I can have the
LEDs replaced without being without a cluster. Of course I bought one for my GS, but
I have seen them for the GLS too.

OMG that sux so much

like i said in the DIY the most important thing is patient, you cant do it if you are in a hurry, the first time did it i did it in a hurry and bad happens like my gas needle not working, because i put too much pressure, the front plastic have crack on the side, my gas smd leds not working at the moment......so like i said on the TOOLS needed LOTS OF PATIENCE.
sorry to see that happend to you but hey theres always a first time, next time will be diff because now you know more than before, at least on what to do and what not to to do.

This post has been edited by LePapirrikY: Oct 6 2008, 06:14 PM