well there was 2 solution for that, one cut the red stripe cable and the other cut this diode. but i dont wanna cut anything yet :P :P until im sure about it.

Erick you turd...JUST CUT THE CABLE!! DO IT!! YOU KNOW YOU WANNA!! :bwekk:
Hurry up and get them installed so I can come by and drool on them. I will be in town later this afternoon...maybe I'll stop by and take a closer look at this retrofit of yours.

ok here its a major update on this mod.
almost everything is done here is my progress.
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12854.jpg)
im using this brackets to place my projectors but i also tapped it for adjusments.
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12855.jpg)
just a test on Ballast, Projector and Bulb.
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12856.jpg)
Ece Slope here the output is not that clear, but i'm about to buy ZKW lens which will give me a better output.
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12857.jpg)
This is what it should look like close to the end. not even done on what i have to do.
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12858.jpg)
Just diff angle.
This is the progress i have so far, its far from done. Today i request off so i can finish this beast.
Comments are appreciate :-D

looking good :D

are you like driving your car blind with out headlight?

i'm driving without headlights, but only at the morning at night i use my other car.
i just finish with my headlights, there still some work to be done but its getting closer to be done.
now i need a lot of :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer:
:P

YOU SUCK! THAT STUFF LOOKS LIKE TURD! HAHA J/K dude. You know I envy your modding funds. I was just thinking...you wear gloves on this mod...but not with the mods where you get REALLY dirty. Like the lower strut bars...I think I STILL have dirt under my nails!

well i just finish my master piece. FINALLY!!!!
I had some extra time at work and i was thinking doing my custom eyelids, this is what i came up with.
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12919.jpg)
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12916.jpg)
then i put that on practice, its not the final product but you got the idea.
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12917.jpg)
i'll be driving my car like that, no shrouds for both projectors since i'm also making a custom one.
I LOVE THAT VIEW!
(IMG:http://www.streetkiaz.com/streetkiazx/uploads/photos/12918.jpg)
All finally done!!
I'll do a HOW TO for this one, since its a different method than what rondy use.
enjoy. :beer: :beer: :beer: :beer:

This post has been edited by LePapirrikY: Aug 25 2008, 05:18 PM

I'd put the protective shrouds back on...Rock vs. Projector lens...rock always wins...

lol

looks good! did you fix the harness?? what did you do? let us see the cut-off!

ok evan here are the shrouds that i'm talking about. It's basically to hide the projector except the lens.
(IMG:http://i16.ebayimg.com/05/i/001/06/eb/aabf_1.JPG)
and obviously i'll close my headlight besides rocks i dont want any bug hitting my lens.



well about the harness, i havent fix it yet , i was talking to the guy from retrofitsource to find out whats going on, but seems that he doesnt know either. the good thing its that he will send to me the diode that i cut, in the mid time i have to figure whats going on. About the Cutoff well i havent took any pics of it because i havent put my ZKW lens on them, not until i get my shrouds done. also i took out my turn signal projector off because they shake too much while driving, i'll have to put them back when i make their shrouds as well.

This post has been edited by LePapirrikY: Aug 26 2008, 06:14 PM

so update?

well i havent work on my headlights due to limit time since my classes already begging but the only update i have so far its that i already receive those diodes...and its 25 of them, and i didnt pay anything for those, the guy from retrofitsource pay them for me. so i have plenty to work on.
In couple days i'll picking up a CF hood with scoop, so lets see what happend in the following weeks, plus here are some pics of ZKW replica lens.



This post has been edited by LePapirrikY: Sep 8 2008, 02:10 AM

:w00t: I want those lenses!

I was looking for the original but those are rare plus they are expensive. i found 1 but they were as much as my projector. searchin more i found that they are about the same, pretty much identical.so why waste so much money. by the way rondy can u take a pic of ur harness i wanna see wats the diff between harness.

(IMG:http://i286.photobucket.com/albums/ll104/rondy_/DSC02504.jpg)

(IMG:http://i286.photobucket.com/albums/ll104/rondy_/DSC02507.jpg)

(IMG:http://i286.photobucket.com/albums/ll104/rondy_/DSC02508.jpg)

This one doesnt work. When I turn on the high beams the bulb turns off.

The one Im using has a different relay. Cant take pictures unless I remove headlights.

What u did with ur harness? u put everything inside of one healight? or what?