Ok so here is the story. My wifes 95 accent needed the drivers door hande assemebly replaced, which I manged to do fine.

What I am finding though is that the central locking (which is manual i.e. you use a key there is no remote) works fine without the door trim/panel on. As soon as i put the door trim panel back on the central locking locks all the doors other than the drivers door. The lock goes down but you can still open the drivers door. The others are locked and dont open. As soon as I take the trim off all the doors lock fine.

I am guessing that the door trim must be pressing on something to stop the lock going all the way down or something.

Anyone have any ideas. I have taken the door trim on and off abot a hundre f@#$%^ times and I cant work it out.

Thanks