After tearing my hair out trying to get accurate info about H100 wheels, I chanced across these bad boys on ebay!
(IMG:http://i245.photobucket.com/albums/gg75/Monckyman/IMG_3833.jpg)


They come from an 02 Hyundai Coupe with the 5 stud wheels 114 stud ,67mm centre bore. Offset is 38.
The ones in the pic are 16"with 205/55/16 tyres which means I have a very slight rub on the front wishbones.This however is easily banished by using some wheel spacers. I used 10mm as the balancing weights on the back need 5mm clearance, but you can get 3 5 6 and 9 as well as silly sizes.
Cost of the wheels with tyres was £100. Cost of spacers was £24.00
Next mod is decent tinting on side and rear windows.
Anybody else tarting up their van?

Yes, those are 2002-2004 Tiburon (Coupe, Tuscani) 16" wheels. I would think as set of 17" would clear the front wishbones because of the larger diameter. Below are other Tiburon, Sonata and Azera wheels that have the same bolt pattern and center bore:

2002-2006 Tiburon 17":
(IMG:http://i90.photobucket.com/albums/k256/mysticarcangel/rims003.jpg)

2005-2006 Tiburon 16":
(IMG:http://www.autoguide.net/apf/images/products_small/keystone/zob29282f.jpg)

2007-up Tiburon 16" (left) and 17" (right):
(IMG:http://www.agedstock.com/images/newvehicles/hyundai/2007/tiburon/wheels.jpg)

2006-up Sonata 17":
(IMG:http://us.autos1.yimg.com/img.autos.yahoo.com/ag/hyundai_sonata_glsv6_2008_exterior_8_346x270.jpg)

2006-up Sonata 16":
(IMG:http://www.edmunds.com/media/roadtests/comparison/2005/sonata.accord.camry/06.hyundai.sonata.whl.160.jpg)

Azera 16" (left) and 17" (right):
(IMG:http://www.agedstock.com/images/newvehicles/hyundai/2008/azera/wheels.gif)

This post has been edited by NovaResource: Apr 1 2008, 10:02 AM

Nice info Nova! Wish i`d gotten 17"now! :grin: