Hi to all i'm new around, i bought a scoupe mkII 93' 1.5 12v non turbo, one week ago, it's not in driving condition right now, but as my projcet it will be :)
will post pics as the project will go along...

... first i had really hard time in fidning parts for it, i needed both front lights, the blinkers but i manage to find them all, i needed also front and rear bumper, i managed to find only rear bumper from MK1 and it fits, and i also need a hood...
new parts are extremely expenceive ... so will continue with my search for the front bumper and hood... i was thinking if i cant find, can i adjust a lantra bumper on the scoupe, with modification cuting extenditg etc...

the temperature meter doesnt work, is it a comon problem or i have some cable disconnected?
now about the engine... the car wasnt driven for some time, i changed the plugs cables, and still not working fine, when i start it it works ok in place when i try to give it a little gas it whants to shut down, and after some time it starts to smoke, but not oil, it smokes like unburned gasoline....
where should i look for the problem? ingnition, timing?

Regards Kiril

If you were in the USA, I would be able to help you out as far as the headlights, bumpers, ect. Also, you will probably need to replace the coolant temperature sensor and sender for that temp gauge/meter to work correctly.

Here is a link of how to do it:
http://www.hyundai-forums.com/index.php?sh...ant+temperature
(Ignore the first post, I was stupid then...)

Let me know if I can help. PMing me is the best way. There are a lot of very scoupe knowledgeable people on this forum. Sometimes they are a little slow to reply, but they will help you. :)

Also you said you changed the plug cables. Try actually replacing the plugs as well. It can't hurt. Other than that, I don't know what to do. I'm not much of a mechanic. (I believe once I read somewhere that replacing those temp sensors can cure a certain smoke problem... so replace those first. )

-Nick

Thanks for the advice, i did change the plugs also, will do some work on it over the weekend hope will cure the problem.

Every bumper can fit but the amount of work to make it fit wil be different :)

About the other things I dont know.

you are right about that one :)
i had some time working on the car today, removing the spoilers and plastic stuf etc.. will continue tomorrow... i noticed one thing , when i turn on the ignition i hear a buzz sound coming from (idle speed actuator) i read that there are coils there but is it normal?

I've never heard a noise coming from it

I never had a noise coming from mine...
Just curious, is your's a 5-speed or an automatic?
And yeah, any bumper CAN fit with modification. Although apparently an Impreza bumper will fit rather easily. (I wish I had an Impreza bumper... :P)

-Nick

(What's up TPA?)

Mine is manual 5 speed... and i'm guesing that the part with the buzz i mentioned is not working properly and could be the cause of my car now working properly?

subary imreza bumper would be even harder to find :D , will go on a part hunt in monday i have to find a new hood

hi there i think i can help you a lltle i got the frnt and rear bumper for a $100 a piece here in puerto rico i saw a scoupe with a 98 mirage 4 door bumper and it looked kind of nice o and it took minor modifications to fit iton the car. :57:

i would pay you 200$ for them, but dont know how they can be delivered? and dont even want to think about the cost of the delivery :),
cause i'm from Europe, Macedonia , if i dont find original bumper, i will try a mk1 or lantra... hope i will find original tomorrow

here are pics of the car work in progress

(IMG:http://i25.tinypic.com/313kmd1.jpg)
(IMG:http://i25.tinypic.com/29kw4fn.jpg)
(IMG:http://i28.tinypic.com/33z63nl.jpg)