OK... here is the deal!

I have the budget and I have the car (hyundai coupé 2.0FX (RD2))

What to do?

Here is some stuff I have in mind to order next week!

Erebuni - Kit 107 Frontbumper
Erebuni - Kit 107 Sideskirts
Erebuni - Racing Carbon Fiber Hood
Versus Motorsport - rearbumper
APR Performance - GTC-300 Adjustable Wing

H&R - Coilover kit
H&R - Swaybar 26mm, front
H&R - Swaybar 20mm, rear
Sprint Performance - Camberkit, front
Sprint Performance - Camberkit, rear

HP Racing - Big brake kit

Enkei - RS7 18x7.5 wheels, silver

That will be the exterior, but.. there is an engine and I have no clue what to do.
Turbo would be nice, but where to find one, and what do I need to do more.
I know that I need to have a lower comp. if I put a turbo on is there anything else
U people can suggest for this car?

Is it possible to have turbo and a supercharger at the same time?

/iPEX

This post has been edited by iPEX: Jan 3 2005, 11:07 PM

Hi!......everything you list sounds well thought-out!.

A turbo would give the power to match those mods. & Alpine do the best kit for your car.
Budget to spend $5K to purchase, have installed & fully dyno-tuned.
My Webpage
Cheers,
Nick. :)

Have some news for this project..

Have been in contact with a company in korea.
The team is waiting for the componentlist and the pricetag for the engine!

We also searching after a company that can build carbonfiber components for enterior and exterior!

Is there anyone out there have any clue where I can get a Seqshift gearbox for this car?

We are right now working on the Team internetsite and will put all pictures and videos there. There will also be oppertunety for other people to have there own room for "extreme-hyundai-makeover" :P :blink:

This post has been edited by iPEX: Jan 4 2005, 10:41 AM

The mail has dropped down in my mailbox :D

The car will have a 350hp turbocharged engine with a little extra boost from nitro!

Also did find a new spoilerkit from concepto Design wish was really cool!
But I go for the erebuni/versus motorsport style!

We have also be hitting a problem on the car!
The wheelhousing is to small...

The 2001 model have 15" wheels from factory so 19" or even 18" will become to big!
We are working on this, the result will not include any spacers becouse that is dangerous to drive in High speed with. The wheelnuts can just go off and u will have a very diffrent experiance with your car! IF and only IF you wanna go with spacers anywhy, this is a good advice from me to you, free of charge ofcourse, dont use spacers thicker then 10mm.

Thats it for know...

Cya

This post has been edited by iPEX: Jan 5 2005, 10:24 AM

Hi again!.....18" wheels will fit easily on a Gen.II (RD2) Coupe as long as the offset is kept close to Hyundai`s normal offset of +42 mm.. Literally hundreds of people have done this!.

Unfortunately the only way to get a sequential gearbox for the Beta engine is to build one..........you may have to do this anyway, as Hyundai gearboxes are not the strongest & certainly won`t take 350 B.H.P.!.

Cheers,
Nick.

Not tested the 18" wheels yet..

aimco clutch from ebay.
sell stage 3 clutch kit & oem clutch kit
http://stores.ebay.com/Aimco-Clutch-Co_W0Q...genameZl2QQtZkm

for my car, i'm modifying the engine.
extra parts i've got include, thicker head gasket 2.2mm, obx adjustable cam gear, obx set of pulleys, manifold and gt28rs turbo rated at approx 350-400hp.

still shopping around for the stand alone computer to handle the fuel and ignition.

cool