The Cluthch engages when the pedal it almost completly up just inched before that. The mechanic said it needs adjustment and the manual says there are no adjustments on the hydralic clutch system and is self adjusting. Looks pretty hard to bleed the fluid , not like the braking system does with no bleeder screw found. Any sugesstions on how I can get it to engage around the middle of the peddle distance from the floor, would be much apreciated. Helping others with their car Troubles. This is A great site.
Chris from Calgary, Canada :00000732:

This post has been edited by cpetitclerc73: Sep 17 2006, 07:32 PM

there should be a bleeder on the slave syl. which is down below on the bellhousing somewhere. Not totally sure as I don't know much GM, and I was a whopping 1 year old when that rolled out of the factory lol!